Saturday, June 29, 2013

The Octal Phono Preamplifier, Part 4: Assembly

Hi!

In this post I will show the assembly of the Octal phono stage with the more elaborate power supply which was introduced in the previous post.




Most of the parts are mounted to the top plate. Here the plate with the sockets, power transformers and one of the chokes:







The sockets of the signal tubes are mounted with vibration damping rubber pieces:





Wiring of the heaters and rectifier tube:




Adding the heater choke and the terminal strips for all the passive parts:




Adding the passive components:




The finished phono stage from the back side during the first test run:




Completed with covers for the transformers and B+ choke:





Some comments about the sound from the first user of this phono preamplifier:

This preamp has absolutely no hum in my system. What is remarkable is also the absence of any other noise. It is just as quiet as the transistor phono stage which I was using before which got praise for it's low noise. The sound stage is first class which is important for me since a lack of sound stage would be immediately apparent through my electrostatic speakers. Everything is at the right place and the sound stage extends well outside of the speakers. The music is very powerful. This preamp sounds very relaxed and enjoyable both at high and low listening levels. I have found 'my' phono stage.

The phono stage in it's new home:




And for the german readers the comments of the owner in german:


Absolut kein Brumm! 

Das Ding ist unglaublich rauscharm! Tatsächlich ist diese Phonopre bei "meiner" Lautstärke in den Pausen zwischen zwei Titeln genauso "mucksmäuschenstill" wie meine vorherige Phono (und dieser "transe" hat man u.a. DAS als ganz grossen Vorteil ggü. Röhre attestiert) Also auch in diesem Punkt: Hut ab!

Räumlichkeit ist allererste Sahne! Das war mir ja besonders wichtig, weil einem (bzw. mir) beim Hören über Elektrostaten soetwas sofort (negativ) auffällt. Ich denke dass deine Phono eine extrem gute Kanaltrennung haben muss. Jedenfalls ist bei "Harry Belafonte sings the Blues" alles an seinem Platz, bzw. dort, wo ich es in Erinnerung habe und die Musik geht unveränder rechts und links über die Elektrostaten hinaus.

Was mir ( jedenfalls am Anfang) aufgefallen ist: ggü. anderen Präs hatte ich das Gefühl, etwas mehr Abstand zur Bühne zu habe. Also jetzt Reihe 15 und vorher Reihe 3. Was explizit keine Kritik ist! 

Meine Freundin meinte noch, dass die Musik jetzt irgendwie "kraftvoller" rüberkommt als vorher. Ich hab Sie gefragt, ob sie "wärmer" meinte, aber das hat sie eindeutig verneint. 

Und dann (sehr laienhaft und für dich vielleicht komisch) noch etwas sehr Positives zum Schluss:

Hatte gestern abend wieder das gleiche Erlebnis wie meine erste Begegnung mit einem McIntosh: wenn ich Musik höre in "normaler" Laustärke (also kein Hintergrundgedudel) und dann trotzdem so entspannt hören kann, dass ich ab und zu (trotz relativ hoher Lautstärke) fast einschlafe! Entspannung! Das ist der Grund, warum ich Musik höre!




Thanks a lot to Steffen for the description and the photos.





Best regards

Thomas

9 comments:

  1. Hi Thomas,
    extremely nice, as usual. May I ask where those fancy tube sockets come from? Or can they be sourced from you?

    Cheers: Holger

    ReplyDelete
  2. Thanks Holger :-)

    I can send a few of the sockets to you if you want

    Thomas

    ReplyDelete
  3. Hello Thomas
    Beautyful work elegant style
    minimalism & sophistication
    Best sound from this tophology
    VinylSavour first class DIYblog
    with clear nice schematics and photos.
    Ready i have beagin to collect some parts:
    tubes , switches,connectors etc
    be pleasure to build one in future
    Thanks Thomas:-)
    Best regards from France
    Krzysztof


    ReplyDelete
  4. Thomas--would be very cool to have a version of this with stereo/mono input and some variable eq so some of us can play pre '55 mono records, take advantage of your latest work of vari-eq, but not have to buy/build multiple phono stages. Just a thought...

    ReplyDelete
    Replies
    1. Hi Max,
      since I offer custom builds, this is of course possible. If you want to build yourself, check the schematics which I published for Var-EQ mono and incorporate them into this

      BR

      Thomas

      Delete
  5. Wouldn't the eq be different given different tubes? Also, are you offering non LCR phono as a kit, or no phono kits at all. Thanks

    ReplyDelete
    Replies
    1. Hi,

      yes of source the EQ needs ti be calculated for different tubes. I am currently not offering any phono stage kits. If you want to builds any of y published schematics, you can order the transformers and chokes from me. All other parts are easily obtainable

      Delete
  6. Hi Thomas. I discovered your blog through the "Tube of the month" section. I follow all your articles and i learned a lot from you , your clear explanations and your sincere attitude. Thanks Some questions. Why boxes of all your builds are so tall? What you use as boxes? Thanks. Fabrizio

    ReplyDelete
  7. Thanks! I don't quite understand your question. The chassis are sized such that every part fits in. I have different kinds of chassis in different sizes and types. The latest are just 10cm high

    ReplyDelete