DISCLAIMER

All rights of photos and text reserved. Usage of photos or text from my blog on other websites or for any other purpose only with prior permission. If you want to use any material from my blog please contact me by email.

Wednesday, April 8, 2020

The Passive Line Level Crossover

Hi!

Here some photos of a custom passive line level crossover.




It is a passive crossover to be placed between preamp and power amps for an active system.




The crossover is 2 ways with a fixed corner frequency. Each way can be attenuated in 12 2dB steps, separately for each channel. In this case a crossover frequency of 850Hz was specified by the customer. Finer attenuation steps are  possible.




The filter circuits are LCR type with 1st order slope. Attenuation is done with auto former volume controls. The input impedance is 300 Ohm. So a vey low output impedance preamp is needed, ideally a 10Y preamp.




Best regards

Thomas




3 comments:

  1. Interesting, you say first order and LCR, does that mean an inductor for low pass and capacitor for high pass? Was thinking there might have been a way to use an inductor in parallel for the high pass. Cheers Grant

    ReplyDelete
    Replies
    1. LCR Filters are used for both High and Low pass. These are constant impedance filters.

      Delete
  2. Okay, found the 2012 posts on crossovers. Doh, understood.
    Cheers
    Grant

    ReplyDelete