DISCLAIMER

All rights of photos and text reserved. Usage of photos or text from my blog on other websites or for any other purpose only with prior permission. If you want to use any material from my blog please contact me by email.

Tuesday, August 27, 2019

Tube of the Month : The 6BX7

Hi!

In last months tube presentation of the 6BL7 I briefly mentioned this tube. Have a look at the 6BX7.




The 6BX7 belongs to a family of 3 medium mu double triodes along with the 6SN7 and 6BL7. They differ in amplification factor, transconductance and plate resistance.

All 3 of them share the same octal base. The 6BX7 has the lowest amplification factor of them with a mu of 10. But this comes with a low plate resistance of 1300 Ohm. Wire both triodes in the bottle in parallel and this halves to 650 which is in the territory of a 2A3 output tube. This is one hefty triode for such a small bottle. Its characteristics would also make this an excellent driver tube with quite large voltage swing capability. Besides a flea power tube amp it would also serve well in a headphone application or line preamplifier. Another tube which is rather forgotten but deserves more attention. I did not have any of these in stock, but after covering the 6BL7 last month I thought it would be a good idea to get some for completing the series of 3 cousin medium mu double triodes. To my surprise they were easy to find at modest prices. As always we will start with a look at the plate curves both from the datasheet and from a real life sample.








I only got some 6BX7GT from 2 different manufacturers. Here some made by General Electric:







From RCA I have samples with three different construction styles.




The first one has a clear top and the getter on the side.








Those little boxes on the top are cooling fins for the grids.




Next we have a coin base version:








And lastly a version with the getter applied in the top dome.












And now the tube in operation:





What a neat device. So many tubes, so little time to try them all.




Best regards


Thomas





4 comments:

  1. Thomas, Never heard of this tube until today that is.... Any chance of a project in the works using this tube soon? Sounds like a very good candidate for a headphone amp! Randy/U.S.A.

    ReplyDelete
    Replies
    1. Hi Randy, I have too many other things going on so will probably not get around to work with this tube for a long time.

      Delete
  2. Thomas, So many tubes.... so little time! Gotcha. Randy/U.S.A.

    ReplyDelete
  3. Hello Thomas - I am the happy owner of a little collection of these tubes. Over on the headphone forum Head-Fi, there is a gentleman who builds a custom output transformerless headphone amplifier using these tubes. It has an SRPP output stage using three 6BX7 in parallel per channel, total of six tubes. I have to say, the results are excellent. As such I have collected several makes of 6BX7: General Electric, RCA, Tung-Sol, Fivre, and Toshiba. The Japanese Toshiba's are my favorite of the bunch, followed by the Italian Fivre.

    Thanks for writing an article on these great tubes.

    ReplyDelete