All rights of photos and text reserved. Usage of photos or text from my blog on other websites or for any other purpose only with prior permission. If you want to use any material from my blog please contact me by email.

Thursday, November 30, 2023

New Chassis Material Arrived


Just received some top plates for some of the upcoming Compactron gear.

Top plates in silver for a DAC and a preamplifier.

I am really fond of the precision machining of my new suppler MWM.

A few pictures of my recent visit there.

One of my faceplates in the making.

Raw faceplates ready for the next step in finishing.

All face plates get brushed for a nice textured surface.

This involves manual work and a lot of experience. I had samples made by 5 different suppliers until I settled with MWM for their expertise in metal surface treatment.

The top plates will get glass pearl blasted for a contrast with the face plate

Side panels in aluminum as an alternative to wood panels:

Glass pearl blasted and brushed:

Different colors are possible too of course, here a top plate for a power amp in black:

Many more colors will be coming soon!

I'd like to thank the nice people at MWM for the dedication and commitment to quality. 

Best regards


Tuesday, November 28, 2023

Internal Modules for the Upcoming Compactron Gear


Work on the internal modules of some of the previously announced new Compactron gear is in progress.

All tubes are horizontally mounted inside the chassis. Their sockets are on internal plates. Some of those also carry power transformers.

Rectifier modules for power amps:

Power supply modules for preamplifier and DAC:

Modules with signal tubes for preamplifier and DAC:

Power amp signal tubes:

Stay tuned for updates as the assembly progresses.

Best regards


Wednesday, November 15, 2023

Tube of the Month : The 851


Since the tube of the month series comes to an end soon, I picked a special tube for this months presentation. I'd like to show the biggest tube type in my collection. Meet the almighty 851.

The 851 is one of the largest air cooled transmitting triodes with its gargantuan bulb diameter of about 15cm and overall height of more than 40cm.

With a maximum plate dissipation of 600W (!)  it is capable to deliver 160W output power in a single ended Class A1 circuit and a whopping 2400W in Class B push pull. For this it needs to be operated at up to 3kV plate voltage and a quarter of an Ampere plate current. The filament requirements are equally hefty with 11V at 15.5A. The amplification factor is a bit over 20 and the plate resistance comes in at 1.6kOhm. Due to the rather high amplification factor the grid voltage swing needed to drive the tube to full power in single ended operation is less than 200V peak to peak. About as much as that of the 300B. I would see a 211 as the perfect driver tube for the 851. Connection to the tube happens from both sides through a large plate cap at one end and two thick filament pins on the other. The grid is connected through a blade which  is located between the filament pins. The connection is the same as with the 849 the little sister of the 851. For a complete set of technical parameters see the General Electric data sheet. Obviously creating an amplifier with this tube would be a daunting task. When I first saw a 851, I had to have some and I contemplated building an amp for it. Initial planning resulted in at least 3 chassis per channel, one for the high voltage supply, a filament supply chassis and the actual amp. Still each chassis would be quite big and heavy. Who knows maybe one day I will work on such a beast.

The plate curves from the data sheet above and the plate curves taken with the curve tracer. Due to limited voltage range of the tracer only up to 400V and with grid voltage steps of 2V:

And now some series toob porn:

Here we have a General Electric 851 in all its glory.

What a massive slab of graphite as plate!

Close up of the filament tension springs:

A close up shows the mesh like structure of the grid:

The filament and grid connections:

Plate cap:

Not sure what the '50 HRS' indicates. 50 hours of burn in ?

For size comparison a ELROG ER845 next to a 851:

A few more close up shots:

An 849 next to the 851:

One of my 851 came in it's original packaging:

The tube is suspended inside:

Two of my 851s:

I also have two sets of suitable sockets:

These are all the 851 I have, 2 in pristine condition and two worn out:

This one is a Westinghouse.

And now the 851 in operation:

Even more impressive in the dark:

The filament consumes 170W of power:

Quite the light show! I hope you enjoyed the penultimate post in the tube of the month series. Stay tuned for the last one to be published next month.

Best regards