DISCLAIMER

All rights of photos and text reserved. Usage of photos or text from my blog on other websites or for any other purpose only with prior permission. If you want to use any material from my blog please contact me by email.

Monday, May 1, 2023

Preview of the Integrated 300B Amplifier

 Hi!

The chassis material for the integrated 300B amp arrived. Here a quick preview of how it will look like:




In March I showed the test build which was used to evaluate the concept. Now a version in the final chassis is being built.




The 6DN7 driver tubes in front of the 300Bs. Two power transformers and a choke are hidden under transformer covers.



At the left corner in the back two rectifiers tubes. 6AX4 or equivalent tubes like 6DA4 and 6DQ4 can be used.



Two more chokes and the output transformers will be mounted  under the top plate.



The first version will also get headphone outputs at the front. Any impedance headphone can be used.



Initial pricing will be 8500 Euros (within EU including VAT) / 7150 Euros (export). Price will be raised by 500 Euros later on. The price includes Elrog ER300B and NOS 6DN7 and rectifiers. Any 300b can be used. The unit can also be ordered without output tubes. Stay tuned for photos of the final build when assembly is finished.

Best regards

Thomas




11 comments:

  1. preview for Munich High-End ?

    ReplyDelete
    Replies
    1. No, I will not exhibit in Munich. The show became to much focussed on B2B for me

      Delete
  2. That is a amazing bargain price! Beautiful compact design!

    ReplyDelete
  3. Hi Thomas - you mention a HP version with 3 impedance output in a previous post. Is that a different build?

    ReplyDelete
    Replies
    1. I can build a version with impedance settings on request. This one however is able to drive all headphones low and high impedance as well as speakers. If the gain is too high the volume can be attenuated by 20dB with the switch besides the volume control

      Delete
    2. Ok thanks - do I understand correctly that such a version would require transformers with windings for the specific impedances?

      Delete
    3. yes and I have those transformers in stock

      Delete
  4. it doesn't look like it has enough clearance between the transformer cover and 300B socket for non-Elrog tube.

    ReplyDelete
    Replies
    1. It has. Wait for the post with the final amp which will also show fotos with other 300B tubes

      Delete
  5. Very cool idea and looks superb! This might be very succesful, considering the increased popularity of headphones. 801 as a driver tube, would that be an option?

    ReplyDelete